Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.     

高速双边缘光纤光栅波长解调技术

提出一种双边缘结构对光纤光栅传感进行波长解调的方案，利用被测光谱通过不同光谱特性的滤波器时输出不同光强的比值确定被测光的波长.该系统在解调时不存在任何机械移动部分，比扫描式的解调方法测量速度更快，运行时更稳定、更精确.     

用于波分复用系统的多峰干涉滤光片

介绍了用于波分复用系统的多峰干涉滤光片的设计原理,提出了滤光片透射峰位置的确定方法,讨论了影响滤光片半宽度和截止度的因素,给出了滤光片的膜厚容差分析结果,表明透射率监控标准偏差在<0.5%范围内,可以得到波形良好的多峰滤光片,最后给出了实验结果.     

一种不等带宽光学梳状滤波器

提出了一种新型—Michelson—三面镜FabryPerot型50GHz不等带宽光学梳状滤波器设计方案,分析和模拟表明:该器件将一路信道间隔为50GHz的输入信号分离成信道间隔为100GHz的奇偶两路输出信号,其中在3dB处,奇数信道带宽大于30GHz用于10Gb/s传输,偶数信道带宽大于60GHz用于40Gb/s传输对于将来的40Gb/s系统,该器件具有优势.     

OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.     

NO-2-I-体系双波长紫外分光光度法测定痕量亚硝酸根

在稀盐酸介质中,亚硝酸根氧化碘化钾的反应产物I-3在288nm和352nm处有两个强吸收峰.基于此建立了双波长紫外分光光度法测定痕量NO-2的新方法.该法简便、快速、选择性好,线性范围为0-0.4μg/mL,检出限为3.4×10-9g/mL.用于河水、井水、矿泉水中亚硝酸根的测定,结果令人满意.     

单个波长到多个波长的变换实验

报道一种波长变换的新方法.采用此方法不需要任何泵浦光便能够直接将信号光变换成在特定谱宽内的任意多个任意波长的变换光,这对于将来的波分复用光网络提供了较大的方便.此波长变换的原理是利用色散位移光纤的非线性效应产生超连续光谱(SC)信号,由于这种SC信号携带有变换光信号,对这种连续谱进行滤波便能够得到所需要的任意频率的变换信号.此变换方式具有变换频带宽,偏振不敏感的优点。     

X射线荧光光谱法分析玻璃纤维中主、次量元素成分

采用粉末压片-波长色散X射线荧光光谱法分析了中碱及无碱玻璃纤维中硅、铝、钙、镁、铁、钛、钾、钠、砷、氟等10种主、次量元素成分含量。以6个标准样品并结合两个参考样品建立校准曲线，采用DeJongh模式方程有效校正玻璃基体中元素间的吸收增强效应和重叠效应。该方法测定10个元素的精密度和准确度均较好，其相对标准偏差在0．35％～2．86％之间，对实际样品的分析结果与化学法相吻合，可应用于玻璃纤维中多元素成分的快速分析。     

基于遗传算法的波长选择方法在绿茶近红外光谱分析模型中的应用

利用遗传算法(GA)提取茶叶的近红外吸收特征波长的方法,研究建立了绿茶水分和氨基酸的近红外分析模型,并对波长选择前后两种成分的模型进行了比较分析。结果表明,经遗传算法波长选择后,简化了分析模型,同时模型的稳健性增强。氨基酸预测集的均方根误差(SEP)减小82.1%,水分预测集的均方根误差减小(SEP)76.6%,它们在波长选择前后对应的分析波长数之比分别为995∶7和1990∶33。     

Beyond green with synthetic chlorophylls – Connecting structural features with spectral properties

The distinct features of chlorophylls in photosynthesis have led to the formation of numerous derivatives for applications encompassing solar energy conversion, molecular photonics, photodynamic therapy, and molecular imaging. Synthetic chlorins created de novo and bearing a geminal dimethyl group in the reduced ring have proved invaluable for fundamental studies. Four decades of research have led to accumulation of tabulated spectra for > 400 such synthetic chlorins with distinct structural frameworks (17-oxochlorins, 13¹-oxophorbines, chlorinimides) and substituents (alkyl, aryl, ethynyl, phenylethynyl, acetyl, formyl) located at specific (meso, β) positions. In this review, spectral traces (324 absorption, 247 fluorescence) are assembled along with photophysical data including the molar absorption coefficient (ε), fluorescence quantum yield (Φ_f) and singlet excited-state lifetime (τ_s). The review uses the accumulated spectral data derived from chlorins all containing a uniform molecular scaffold to (1) highlight the effects of molecular structure on spectral features, and (2) identify trends including how ε, Φ_f and τ_s vary with wavelength and other features. Use of a common geminal-dimethyl-substituted chlorin scaffold – beginning with no substituents, to one substituent at designated sites, and to 2 or more substituents – provides a systematic Aufbau approach for understanding the absorption spectra of chlorins on a path to and beyond the native chlorophylls. The review provides insights concerning the rational design of potent analogues of Nature’s preeminent red-region absorbers for potential utilization in diverse applications and is aimed at multiple audiences: those interested in spectral properties, tetrapyrrole photophysics, and the molecular design of new chromophores.